• DSC02468
  • cypress-psoc-programmable-system-on-chip-brochure-70363 1b
  • plug
  • DSC02866
  • DSC02449
  • Department of Electronic and Telecommunication Engineering
  • Processor Design
  • System on Chip
  • Network on Chip
  • Sunset from the Department

Powered by Xilinx Virtex-7

Department of Electronic and Telecommunication Engineering received their first two virtex-7 FPGA evaluation kits on 21st of August 2012. These FPGA development kits are composed of VC707 Xilix FPGAs.


Specifications of these FPGAs are as follows.

FPGA: Virtex XC7VX485T-2FFG1761CES

  • ROHS compliant VC707 kit including the XC7VX485T-2FFG1761 FPGA


  • Onboard JTAG configuration circuitry
  • 512 Mb BPI FLASH for PCIe® Configuration


  • SODIMM DDR3 Memory 1600Mbps
  • 512 Mb BPI FLASH for PCIe Configuration
  • SDIO – SD Card interface

Communication & Networking

  • GigE Ethernet RGMII/GMII,SGMII
  • SFP+ transceiver connector
  • GTX port (TX, RX) with four SMA connectors
  • UART To USB Bridge
  • PCI Express x8 gen2 Edge Connector (lay out for Gen3)


  • HDMI Video OUT
  • 2 x16 LCD display
  • 8X LEDs

Expansion Connectors

  • X2 FMC-HPC connectors
  • IIC


  • 200 MHz Oscillator (Differential)
  • SMA Connectors for external clock (Differential)
  • GTX Reference Clock port with 2 SMA connectors
  • OBSAI/CPRI – SFP+ Received clock
  • EXT Config CLK

Control & I/O

  • 5X Push Buttons
  • 8X DIP Switches
  • Rotary Encoder Switch (3 I/O)
  • AMS FAN Header (2 I/O)


  • 12V wall adapter or ATX
  • Voltage and Current measurement capability

Debug & Analog Input

  • 8 GPIO Header, 9 pin removable LCD
  • Analog Mixed Signal (AMS) Port


 Agile Mixed Signal Evaluation Card

 Key Features

  • Analog evaluation card with ribbon cable to XADC header on VC707 base board
  • Evaluates XADC and AMS blocks with 12-bit, 17-channel, 1Msps ADC
  • BNC connectors allow for external analog input signals
  • On-board 16-bit DAC for analog test


Board Overview

Source : Xilinx.Inc